1 (1)

Custom Baseball Jerseys

Custom baseball jerseys in four styles: full-button, two-button, V-neck and sleeveless. We help you pick the style your chest artwork needs, then sublimate or twill it, youth to adult, from 10 pieces per design with a sample before bulk.

DESCRIPTION

Custom baseball jerseys from Velzyn Wear are made to order in our Sialkot factory in four styles, full-button, two-button, V-neck and sleeveless, for teams, team dealers and baseball brands. Each design starts at ten pieces, with sizes, names and numbers free to vary across the order, and you approve a finished sample before production starts.

Here is a mistake we see every season. A team designs a beautiful script across the chest on a screen, orders it on a full-button jersey, and the placket cuts the second letter in half. The artwork was fine. The style was wrong for it. Choosing the jersey style is really choosing what the front of the shirt can carry, so this page starts there.

The four jersey styles

Full-button

Two-button

V-neck

  • ✓Custom V-neck baseball jerseys
  • ✓Pullover, no buttons, the whole front free for print
  • ✓Popular with tournament teams and fashion lines

Sleeveless

Each style page covers its own construction in detail. This page helps you decide between them and explains what is common to all four.

What you can customize

  • Color: body, sleeves, collar and cuff each in their own shade, matched to Pantone or to a jersey you already have.
  • Decoration: fully sublimated baseball jerseys, or tackle twill lettering and numbers, embroidered crests and sewn patches, alone or combined.
  • Per-player detail: a name bar and number on each back, with an optional sleeve or front number.
  • Trim: contrast collar and cuff bands, sleeve stripes, and piping along the placket or armhole as an option.
  • Brand finish: a polybag, a swing tag and your own woven label inside the collar, so the jersey can go straight onto a shelf.

Jersey fabric

Part of the jersey Fabric Reason
Body Polyester interlock Smooth face for sublimation, firm enough to carry twill letters without rippling
Side or back panels Polyester mesh, on request More airflow for summer tournaments and practice
Collar and cuff trim Knit trim or self-fabric bands Keeps the neck and sleeve ends from stretching out

Weights are not listed here because they change with the style and the season. You get the exact figure in writing on the quote, and it appears again on the spec card with your sample.

Adult and youth fit

Adult Youth
Body length Cut so the tail stays tucked after a hard swing or a long throw Graded shorter, but still cut for a tuck
Sleeves Set-in for a traditional look, raglan for a freer throwing arm Shorter sleeve so it stops above the elbow
Chest room Space for a heavier undershirt in early spring Sized to fit over a base layer, not a coat
Best tip Order the size you wear with the undershirt on Growing players do well going one size up

Adult and youth jerseys can go into one design, which keeps a whole organization, from 10U to varsity, in one look. Softball teams needing women’s and girls’ cuts should see custom softball jerseys.

Choose the style from your chest artwork

Buying guides sort baseball jerseys by level of play: full-button for high school, two-button for youth, pullovers for rec. That ignores the thing that actually goes wrong. The front of a full-button jersey is two panels with a gap, a two-button leaves a short opening at the collar, a V-neck gives an unbroken front, and a sleeveless loses the sleeves. Decorators note that a flat print cannot run over placket piping at all, which is why many button-front jerseys end up with only a left-chest logo. Start with the artwork you already have and read across:

Your chest artwork Full-button Two-button V-neck Sleeveless
Script wordmark across the chest The classic home; letters are split at the opening, so the gap must fall between letters Sits under the short placket, unbroken Unbroken; the V sets the top line Works, with the armholes narrowing the space
Crest or left-chest logo Works on the left panel, clear of the buttons Works Works Works
Big front number Goes on the left panel, so it has to be sized smaller Room for a large centered number Room for a large centered number Centered, slightly smaller
All-over print or fade Possible, but the pattern must meet across the placket Clean Cleanest of the four Clean, and the undershirt becomes part of the look
Pinstripes Stripes must line up where the two fronts meet Easy Easy Easy

If your identity is a script wordmark and you want the traditional button front, we lay the lettering out so the opening falls in a natural gap, then sublimate or cut each half to meet exactly when buttoned. If your artwork is a large centered number or an all-over graphic, a two-button or V-neck carries it without compromise. Brands launching a line often do both: a full-button for game day and a pullover for fans and practice, printed from the same color standard.

Who orders custom baseball jerseys

A coach buying custom team baseball jerseys for one roster and a dealer looking for a baseball jersey manufacturer to stock a whole catalog worry about different things:

Teams and programs Dealers and brands
Usual order One home jersey and one road jersey per player, sometimes a practice top A range of styles in several colorways, restocked through the year
Main worry Getting every name, number and size right Keeping the fit and color identical from run to run
What we do Load the roster once and check it at three points Hold the pattern and color standard for every design you sell

How a jersey gets made: the lineup card

Nine steps, in the order they bat. Each one has a condition that sends it back to the dugout before the next can step up:

Lineup card
Custom baseball jersey, from file to carton
BatPosIn the order
1
ART

Artwork read
We open your files and list every color by Pantone number, every font and every mark that must appear on the jersey.
Out if: a font is missing or a logo only exists as a low-resolution picture
2
STY

Style locked
Front (full-button, two-button, V-neck or sleeveless), sleeve type, collar trim and the size range are fixed.
Out if: the chest artwork clashes with the chosen front
3
LAY

Layout per size
Chest design, back number and name bar are placed on each size, so a youth medium and an adult 2XL both look right.
Out if: a number drops under the rulebook height on the smallest size
4
ROS

Roster entered
Names, numbers and sizes are loaded from your sheet and checked for duplicates and spelling.
Out if: two players share a number
5
SWT

Color swatch
When a shade must match an existing uniform, a printed swatch goes to you before anything is sewn.
Out if: the swatch reads differently from your chip in daylight
6
SMP

Sample
One complete jersey on the production pattern, with buttons, trim and your neck label.
Out if: the chest design breaks badly at the opening or the tail pulls out on a swing
7
PRT

Print and cut
Panels are sublimated, and twill numbers and letters are cut, matched to the approved sample.
Out if: a panel is printed off-register
8
SEW

Sew and trim
Placket, collar, sleeves and hem are sewn; twill and patches are stitched down; labels go in.
Out if: buttons do not line up with their holes
9
CHK

Count and pack
Each jersey is laid against the roster line, folded, bagged and tagged for you or your customer.
Out if: anything on the roster is missing from the carton

Ordering in five moves

1
Pick the front
Full-button, two-button, V-neck or sleeveless
2
Send artwork
Vector files and colors, or a sketch we redraw
3
Send the roster
Names, numbers and sizes on one sheet
4
Approve the sample
Check it, then pay the deposit
5
Receive jerseys
Made in 1–2 weeks, then shipped

Sizing a jersey order

Measure chest and body length with the player wearing the undershirt they will play in. Compare those numbers with the jersey charts on the baseball size chart page, or read the measuring guide on the main size reference. When a roster sits between sizes, choose the larger one: a jersey that is a touch long still tucks, but one that is short will not stay in.

Washing jerseys between games

  • Button full-button jerseys before washing so the placket keeps its shape.
  • Wash inside out in cold water to protect twill edges and printed color.
  • Skip bleach and fabric softener; both work against polyester.
  • Hang dry. Heat is the main enemy of twill adhesive and patch edges.

What the rulebooks say about jerseys

We list only the points that change how a jersey gets built. Sources: the 2026 NFHS baseball book and NCAA Rule 1-14.

Jersey detail NFHS (high school, 2026) NCAA (college)
Back number Plain Arabic, 8″ minimum, solid contrasting color, no duplicates 6″ minimum
Sleeves Similar length on each player; nothing ragged or slit The same principle
Pitcher No white or gray undershirt sleeves on show Compression sleeves covered by an undershirt
Maker’s logo One, up to 2¼ sq in Up to 2¼ sq in, once per location
Front wording From January 1, 2027, limited to the player’s name and the school’s own identity (name, nickname, mascot, logo) Set by the program
Buttons Not addressed in the rows we checked No metal or glass buttons

Travel tournaments set their own rules, so send the event rulebook with your roster. For pitchers under high school rules, plan the undershirt color at the same time as the jersey, especially on sleeveless styles.

Four tests for your sample

Placket check
On a full-button, the chest wordmark gap
The test: Button the sample fully and read the chest from three steps away.
It passes when: No letter is sliced in half, and the two sides sit level
Swing test
Tuck length
The test: Wear it with pants and a belt, take ten hard swings, then look.
It passes when: The tail is still in the waistband
Number height
Rule compliance
The test: Measure the back digits on the smallest size you ordered.
It passes when: 8 inches for high school, 6 for college
Stretch the collar
Trim recovery
The test: Pull the collar open gently for a few seconds and let go.
It passes when: It returns flat with no ripple

What moves the jersey price

  • Style: a full-button with a sewn placket costs more than a pullover.
  • Decoration: tackle twill lettering and numbers cost more than sublimating the same artwork.
  • Trim and panels: contrast cuffs, piping and mesh inserts each add a little.
  • Volume: the unit price steps down when one design reaches 50, then 100, then 250.

Minimums, timing and payment

One design, ten jerseys, as many different names, numbers and sizes as the ten need. Your sample follows 7–10 days after you approve the layout; production takes 1–2 weeks from the day you approve that sample, and most team jersey runs finish at the shorter end. A 50% bank transfer books the production slot, with the balance settled before we ship. A sample ordered by itself is the one case where MoneyGram or Western Union is fine. Dealers and labels buying in volume will find their terms on the wholesale program page.

To start, email the chest artwork, the style you prefer and how many players are on the roster.

Request a Quote

Complete the uniform with custom baseball pants or baseball knickers, add baseball shirts for practice, or go back to all custom baseball uniforms.

Custom baseball jerseys: common questions

Can a script wordmark go across a full-button jersey?

Yes. We place the lettering so the opening falls between two letters, then make each half so they meet level when the jersey is buttoned. You check it on the sample.

Can one order mix jersey styles?

Yes. Each style counts as its own design, so each needs ten pieces. A team can order ten full-button home jerseys and ten two-button practice jerseys together.

Do sublimated numbers meet the high school size rule?

They can. We set the back digits to at least 8 inches on every size when you tell us the team plays under NFHS rules.

Which style works best for youth baseball jerseys?

Two-button and V-neck pullovers are quicker for young players to put on, and they carry a big front number well. Full-button suits older teams that want the traditional look.

Can pitchers wear sleeveless jerseys in high school games?

Yes, but the exposed undershirt sleeves cannot be white or gray under NFHS rules, so pick a dark team color for the undershirt.

Do you make wholesale custom baseball jerseys for resale?

Yes. Dealers and brands order under their own label, and we keep each design’s pattern and color reference so restocks match earlier runs.

Can you copy a jersey we already wear?

Send one jersey. We match its colors with a swatch, copy the lettering layout and fit, and show you a sample next to the original.

SEND YOUR INQUIRY