Custom BJJ and MMA rash guards made in Sialkot under your own label. One design in all five belt colors, printed polyester-spandex or solid nylon-spandex, long or short sleeve, men’s, women’s and youth cuts, from ten pieces with a sample first.
DESCRIPTION
Velzyn Wear works as a custom rash guard manufacturer for BJJ academies, MMA gyms and fightwear labels, cutting and sewing every shirt in our Sialkot, Pakistan factory. We make ranked no-gi shirts, sublimated graphic rash guards and plain training tops, from ten pieces per design, with your name on the label rather than ours.
The catch with academy rash guards shows up later: a student is promoted to purple, and the supplier that printed your white and blue shirts wants another fifty pieces. So the planning here starts with the belt chart, not the logo.
Rash guards we make
Ranked competition shirts
- ✓One design in five belt colors
Built around the no-gi color rule - ✓Long or short sleeve
Short sleeves for women’s MMA bouts too - ✓Solid belt-color option
For athletes who want the whole shirt in rank color
Academy and gym training tops
- ✓Class rash guards
The everyday top students buy at sign-up - ✓Under-gi shirts
A lighter shirt worn under the jacket - ✓Top-ups of 1–3 pieces
Once your first run is on file
Brand and retail drops
- ✓Full-print graphic designs
Edge-to-edge artwork, any colors - ✓Your label inside
Woven at the neck, plus your tag and bag - ✓Men’s, women’s and youth
One design graded across all three
Sleeveless tops can be quoted as an option.
Customizing your rash guards
| Detail | What you can choose | Worth knowing |
|---|---|---|
| Belt-color panel | Shoulders, side panels, sleeves or a band across the chest | We size it so the color share holds on every size |
| Logo | Printed anywhere, or embroidered on the chest | Embroidery is stiffer than the shirt; keep it small |
| Names and text | A surname across the shoulders or down one sleeve | Names can change from shirt to shirt inside one design |
| Color matching | Pantone codes, or a gi patch or shirt you post us | A strike-off proves the match before cutting |
| Neck and hem | Printed or woven neck label; wordmark on the hem band | Hem detail is set on the sample, then copied |
Printed art is dyed into the polyester, so there is no raised ink to crack.
Fabric: two families, one weight range
| Fabric | How it decorates | Who it suits |
|---|---|---|
| Polyester-spandex | Takes sublimation, so the whole shirt can carry art in any number of colors | Ranked ranges, brand graphics, sponsor shirts |
| Nylon-spandex | Not sublimated; dyed one solid color, then logo added | Grapplers who want a smoother, softer hand |
Sublimation dye bonds with polyester, not nylon, so if a quote promises a fully printed nylon shirt, ask how. Mesh side panels and flatlock seams are options on either fabric.
Our standard rash guard cloth weighs 180–240 GSM. The lighter end of that range is cooler and suits a shirt worn under a gi; the heavier end grips the body harder and resists mat friction longer. Other weights are available on request. Whatever you choose is agreed on the quote and printed on the sample’s spec card, so bulk is measured against a number you already accepted.
Fits and cuts
| Cut | Who wears it | How it differs |
|---|---|---|
| Men’s | Adult classes, competitors, retail | Compression through the chest and arms; tall length on chosen sizes |
| Women’s | Women’s no-gi, MMA and under-gi wear | Narrower shoulder, room at the bust, shaped waist |
| Girls’ and youth | Kids’ programs and junior competitors | Own grading, so sleeves and body stay in proportion |
Tall athletes get extra body length on their sizes only, which matters more on a rash guard than on any other top: a shirt that stops short fails the length rule.
One design, five belts: planning a ranked order
The IBJJF asks for a no-gi shirt that is black, white, or both, with at least a tenth of it in the wearer’s belt color. A shirt fully in rank color is allowed too. Either way, one artwork becomes five shirts. Here is where those orders usually go wrong, and what we do about each:
- The stripe that looked big on screen. A thin purple line on the cuff reads well in a mockup and covers a few percent of the shirt. We measure the colored panels against the whole flat pattern and tell you the share in numbers.
- Panels that shrink on big sizes. A logo block drawn for a medium covers less of a 3XL. We grade the belt panel with the size, so the heavyweight’s shirt carries the same share as the featherweight’s.
- Buying stock for belts you do not have. White and blue belts usually outnumber the rest many times over. Send the head count and sizes per rank and we build the order around them.
- Promotions in the middle of the year. Once the first run is on file, one to three pieces in a new rank can be made to match. A newly promoted student is not left wearing last year’s color.
- The black belt detail. A small red area on a black belt’s shirt is tolerated, echoing the red bar on the belt itself. We keep it small enough not to change what color the shirt reads as.
Kids’ programs add gray, yellow, orange and green. Many academies launch the adult ranks first and add junior colors in the second run.
Two more faults that send shirts back
Grin-through. Sublimation colors the polyester and leaves the spandex pale. On a big athlete, a solid black chest pulled tight can show faint light lines. Breaking large dark blocks with texture, and sizing the shirt correctly instead of a size down, keeps the print looking solid.
Ride-up. A rash guard that climbs during a scramble exposes the stomach and no longer meets the length rule. We set body length per size to overlap the waistband, and a silicone gripper at the hem can be added as an option.
Who orders custom BJJ rash guards from us
| BJJ academy | Fight brand | MMA gym or team | |
|---|---|---|---|
| Usually orders | One design in five belt colors | A graphic drop in several sizes | Training tops and women’s fight tops |
| Biggest worry | A shirt refused at the uniform check | Fit or print drifting on reorder | Tops that ride up during wrestling |
| What we add | Belt panel measured on every size | Pattern and color file stored | Length set to stay put at the waist |
How a rash guard order earns its belts
Every order climbs the same five ranks, from white belt to black. Each stripe on the bar is a sub-step that has to be finished before the next one, and an order is promoted only when the line under its belt is true:
one stripe = one sub-step
White belt
The brief
Stripe 1
Files and colors
Vector logo, plus Pantone codes or a garment to match.
Stripe 2
Head count by rank
Students per belt, and their sizes.
Stripe 3
Fabric and sleeve
Printed polyester or solid nylon; long or short sleeve.
Blue belt
Artwork and colorways
Stripe 1
Flat layout
Front, back and sleeves drawn as cut.
Stripe 2
Belt panel measured
Color share checked on the smallest and largest size.
Stripe 3
Every rank drawn
One file per belt color, side by side.
Stripe 4
Dark-area review
Big black blocks flagged where stretch may pale them.
Purple belt
Strike-off and sample
Stripe 1
Strike-off
Each belt shade printed and held to a real belt.
Stripe 2
Sample sewn
One finished shirt with its spec card.
Stripe 3
Mat test
Someone rolls a full class in it.
Stripe 4
Sign-off and deposit
Your yes and half the invoice.
Brown belt
Bulk production
Stripe 1
Panels printed
Every colorway pressed from one color file.
Stripe 2
Cut and sewn
On the approved pattern.
Stripe 3
Checked against the sample
Length, recovery and print lined up piece by piece.
Black belt
Dispatch
Stripe 1
Count by rank
Tallied against your list, belt by belt.
Stripe 2
Label and bag
Your branding on every piece.
Stripe 3
Balance and ship
Second half clears; cartons leave Sialkot.
Stripes mark the order of work, not days. The black belt’s bar is red, as on a real belt.
Ordering in five moves
Count your ranks
Students per belt, sizes per belt
Approve the layouts
All colorways drawn flat
Roll in the sample
A full class, then decide
Pay half
The bulk run is booked
Hand them out
Packed by belt and size
Sizing rash guards for a whole academy
Measure each athlete’s chest and torso length, then check the garment charts on our size reference page. A rash guard is meant to sit tight, so most people take their usual size; competitors between two sizes go up for length rather than down for squeeze. For a first order, a sizing sample in two or three sizes settles arguments before bulk.
Stock ranked shirts or custom?
| Retail ranked rash guard | Ranked rash guards made for you | |
|---|---|---|
| Design | A brand’s design with your patch, if any | Your academy’s artwork in every rank |
| Colors | Whatever ranks are in stock that month | All five belts, from one color file |
| Restocks | Hope the line is still made | Top-ups of one to three shirts |
| Best when | You need two shirts by Saturday | You want one look for years |
Washing and care
- Wash after every session; a damp shirt left in a gym bag is where smells start.
- Turn it inside out and use cold water, with no bleach.
- Leave out softener; it clogs the knit.
- Hang it to dry. Tumble heat is what tires spandex and leaves a baggy collar.
Why academies and labels choose Velzyn
Straight to the maker
- ✓You talk to the people printing and sewing
- ✓No agent marking up the quote
Proof before bulk
- ✓A strike-off for belt shades
- ✓A finished sample you roll in first
Small and steady runs
- ✓A ten-shirt minimum per design
- ✓Bulk finished one to two weeks after the sample passes
- ✓Pattern stored for the next order
Rash guard rules at a glance
Sources: the IBJJF uniform page and Rule Book v6.0 (June 2024), and the ABC MMA Officials Handbook (February 2025). Rules can change between seasons, so recheck before a big event:
| Point | What the rule says |
|---|---|
| IBJJF no-gi shirt color | Black, white, or black and white, carrying at least 10% of the athlete’s belt color; a shirt fully in the belt color is also permitted |
| IBJJF black belts | A small red area is tolerated if it does not hide the rank color |
| IBJJF fit and length | Elastic, skin-tight material long enough to cover the torso down to the waistband of the shorts |
| IBJJF women in the gi | A stretchy, body-hugging shirt under the gi is mandatory; short or long sleeve, any color |
| IBJJF check | Athletes weigh in wearing their uniform before their first match |
| ABC MMA, women | A fitted rash guard whose sleeves end above the elbow, a fitted sleeveless one, a sports bra, or a bra under either; no loose tops |
| ABC MMA, men | No clothing on the upper body in a bout, so men’s rash guards are for training |
Whether a shirt passes is decided by the official at the table, not by any maker, ours included. We build to the published rule and put sleeves on every ranked shirt.
Test the sample yourself
Have your biggest student roll a full round in the sample, then ask them to raise both arms overhead: the hem should still reach the waistband of their shorts. Next, stretch the darkest part of the print across your knee in daylight and look for pale lines. Hold the belt panel beside a real belt of that rank. Finally, pull the neck open wide and let go five times; it should spring back flat, not wavy. If any of these fail, say so and we fix it before cutting.
What sets the price of a rash guard
- Fabric: polyester-spandex for print or nylon-spandex in one color, and the weight within the range.
- Sleeve: long sleeves use more cloth than short ones.
- Colorways: five ranked versions mean five color setups.
- Extras: embroidery, names, a hem gripper, custom packaging.
- Quantity: the unit price falls at 50 pieces, again at 100 and again at 250.
Ordering custom rash guards
A design starts at ten shirts, mixing sizes and printed names as you like. Expect your sample a week to ten days once the artwork is final. After you approve that sample, bulk sewing runs one to two weeks; a typical academy order finishes nearer the first week. Payment goes by bank transfer in two halves: the deposit books the run, the remainder clears once the shirts are packed and before they ship. If you only want a sample first, Western Union or MoneyGram is fine for that alone. Labels and distributors buying wholesale rash guards across several designs can read our wholesale manufacturing terms.
Send your logo, your belt head count and the sleeve length you want.
Rash guards are one part of our custom fight wear range. Pair them with custom spats for a full no-gi kit, add MMA shorts or vale tudo shorts on top, and give women’s fight teams matching sports bras.
Custom rash guards: what buyers ask
Will our ranked rash guards pass the IBJJF uniform check?
We design them to the published rule: black, white or both with at least 10% belt color, skin-tight, and long enough to meet the shorts. The referee at each event makes the final call, and no maker can promise otherwise.
A student was promoted. Can we order just one shirt?
Yes, once your first run is stored with us. One to three pieces in the new belt color are printed from the same file, so they match the rest.
Can the same design come in kids’ belt colors?
Yes. Gray, yellow, orange and green versions are drawn from the adult artwork and graded onto youth sizes.
Why does a black rash guard show light lines when stretched?
The dye colors the polyester but not the spandex, so stretched spandex peeks through. Texture in dark areas and a correct fit stop it showing.
Can you sublimate a nylon rash guard?
No. Nylon will not hold sublimation dye. Pick polyester-spandex for a printed design, or nylon-spandex in a single solid color.
Which tops can women wear in an MMA bout?
Under the ABC handbook, a form-fitting rash guard with sleeves ending above the elbow, a sleeveless one, or a sports bra. Long sleeves and loose tops are out, so fight-night tops get short sleeves.